| 800.508.5545

TS-70 Moly Paste With 70% MoS2

1 lb Jar


TS-70 is a general purpose moly paste with many uses. It has proven to be an outstanding lubricant for a saltwater environment, above and below the surface: subsea riser, BOP, flange equipment and structural bolts. Other applications are components for press fittings, threads in tapping, boundary lubricating of parts in assembly and make-up, bushings of heavily loaded slow moving bearings, and many more. Apply by brushing or burnishing.


TS-70, with 70% by weight of molybdenum disulfide, provides uniform and durable boundary lubrication under extreme pressure, in wet or corrosive environments, and over a wide temperature range. Its coefficient of friction nearly approaches that of pure MoS2, and superior wear protection is assured.  TS-70 does not contain metals.


NLGI GradeNo. 2
Cone Penetration @77°F (ASTM D217)
Solids Oxidation, °FBegins at 750
Minimum Temperature, °F0
Flash Point, °F, (CoC) (ASTM D42)520
Fire Point, °F, (CoC)600
Humidity Cabinet, 60 days (ASTM D1748)Pass (no rust)
Salt Spray, 60 Days (ASTM B117)Pass (no rust)
Wear Preventive Characteristics (ASTM D2266)
Scar diameter, mm0.50, 0.42
Coefficient of friction0.044,0.045
Mean K Factor
ASTM A 193 B-7 Bolt0.122
ASTM A 540 B-23 Bolt0.106

For SDS, please eMail or call:

Tel: (713) 671-2676

Toll Free: (800) 508-5545


SKU : 15-70-916
Categories : Anti-Seize Lubricants, Compounds

Customers who bought this product also purchased
TS-70 Moly Paste With 70% MoS<sub>2</sub>
TS-70 Moly Paste With 70% MoS2
TS-70 Moly Paste With 70% MoS<sub>2</sub>
TS-70 Moly Paste With 70% MoS2