| | | |
|---|
| Click on a name to go directly to that section or
scroll through the full product line: |
|
| |
Greases |
| |
TS-65 Multipurpose Moly EP-2
- non-melt, water insoluble for genral greasing |
| |
TS-66 High Temperature
- synthetic for valves and slower bearings 500-600°F |
| |
TS-67 Arctic Grade
- synthetic for general greasing to -75°F |
| |
TS-115 Corrosion Control
- calcium complex multipurpose grease, good for underwater |
| |
TS-116 Corrosion Control with
Moly - Expreme Pressure |
| |
TS-123 Synthetic Chuck Grease
- 20% moly for extreme pressures |
| |
TS-201 Walking Cam Heavy -
synthetic with 40% metal solids; open gears |
| |
TS-209 Open Gear Lube -
partially synthetic for general greasing; Jackup grease |
| |
TS-210 SeaSafe®
Open Gear & Cable Lube - environmentally safe*
nonmelt, water insoluble; Jackup grease |
| |
TS-264 SeaSafe®
Skid Grease - environmentally safe* for
steel-on-steel skidding |
| |
TS-333 Heavy Grind -
synthetic for heavily loaded bushing bearings |
| |
TS-334 Easy Grease - synthetic,
tenacious film, EP, for heavy duty; water insoluble;
"This grease is so sticky use it where other
greases fail to adhere." |
| |
TS-455 High Temp Grease - to
400°F and higher with more frequent lubrication (with PTFE) |
| |
TS-456 High Temp Grease,
(with Moly) |
| |
CX-154 Lubolene - synthetic, high
temp elastomer-friendly lube for o-rings, gaskets, and packing |
| |
| |
|
Oils |
| |
TS-301 - SAE 85W140 GL-5
automotive gear oil with moly |
| |
TS-302 - SAE140 GL-5 automotive
gear oil with moly |
| |
TS-302SP - TS-302 with 10%
TS-90 Moly Gear Concentrate |
| |
TS-313 - SAE 80W90 GL-5
automotive gear oil with moly |
| |
TS-319 - SAE 250 ISO 100 GL-4
oil with moly |
| |
TS-360 Biodegradable Machine Oil
- vegetable oil with moly; 97.5% biodegradable |
| |
TS-601 Moly Drive Chain Oil
- 1% moly and solvent carrier for heavy duty, dusty conditions |
| |
TS-602 Link Lube Heavy Duty Chain Oil
- 1% moly and mineral oil; available in 3 viscosities |
| |
TS-619 Sewing Machine Oil -
extremely low viscosity synthetic oil |
| |
TS-700 Soluble Oil -
water soluble oil concentrate for light duty machining; mix 1:20 |
| |
TS-701 Laser Lube Synthetic
Cutting Oil - for staineless steel |
| |
CX-162 Synthetic Air Line Oil -
for pneumatic pile driving hammers |
| |
|
Antiseizes |
| |
TS-70 Moly Paste - for assembly
and heavily loaded threaded connections; offshore corrosion protection |
| |
TS-72 SoftTorque - nickel
antiseize for extreme temperatures; petrochemical plants |
| |
TS-73 Torque Tight A/G -
anti-gall for small stainless steel and soft metal fittings |
| |
TS-74 Stainless Antiseize -
anti-gall for stainless steel and soft metal fasteners |
| |
TS-84 Synergel - high temperature elastomer-friendly
antiseize |
| |
TS-85 Synergel LT |
| |
|
Aerosols |
| |
TS-801 Dry Film Moly - with high
content of moly; polymer binder |
| |
TS-802 Chemlube - general purpose
non-flammable and dielectric lubricant and penetrant |
| |
TS-803 Evapo-H-Gear Shield -
general purpose tacky lubricant for open gears |
| |
TS-804 Chain & Cable Lube -
general purpose solvent carrier with moly; dries not to attract dirt |
| |
TS-805 Safety Clean - general
purpose non-flammable and non-conductive solvent cleaner |
| |
|
Miscellaneous Products |
| |
TS-001 Moly Powder - 99.99%
pure American molybdenum disulfide; available in three grades |
| |
TS-125 Die Lubricant - a
forge release compound with mineral smoking |
| |
TS-625 Die Lube Concentrate -
high solids contents in viscous oil |
| |
| |
Rust Preventives |
| |
|
CX-144 Rust Preventive L for indoors |
| |
| |
Wire Rope Lubricants |
| |
|
TS-203 B & R Cable Lube -
moly/asphaltic oil in solvent carrier; penetrates and dries |
| |
|
TS-210 Open Gear & Cable
Lube - environmentally safe nonmelt, water insoluble; Jackup grease |
| |
|
TS-480 Wire Rope L & P -
lubricant and protectant in solvent carrier; for salt water conditions |
| |
| |
Additives To Finished Oils |
| |
|
TS Moly Motor Eze -
moly + proprietary component additives for motor oil; mix 1:10 |
| |
|
TS-90 Moly Gear Concentrate -
moly + gear oil additives + polymer for gear oil; mix 1:10 |
| |
|
CX-191 CT Injector Head Chain Oil Moly Additive -
moly + corrosion inhibitor; mix 1:21 |
| |
|
CX-193 Draw Works Chain Oil Moly
Additive - moly + other additives; mix 1:10 |
