Application
TS-91 Super Moly Treatment is an ultra-
premium additive
for oil used in final drives and transmissions of
motorcycles. It is compatible with all grades of
gear oils. DO NOT USE IN TRANSMISSIONS WITH WET
CLUTCHES.
Benefits
TS-91 Super Moly Treatment is a proprietary
blend of moly and synthetic
oil. Moly is a solid film lubricant with an exceptional low
coefficient of friction and an
affinity for steel. The moly decreases friction of the two
counter-moving sliding surfaces
of gear teeth by filling in microscopic pores of the metal
surfaces and plating out over the
surface.
- TS-91 lessens metal-to-metal contact
. . . to reduce friction and wear.
The synthetic oil enhances the capability of mineral oil to
retain it viscosity ("thickness")
at elevated temperatures. This capability is especially
beneficial when the gears run at high speeds.
High speeds generate heat that causes normal oils to become
"thin" (lower viscosity) and
reduce their abiltiy to provide an adequate film of
lubricant between the contact surfaces of
gear teeth.
- TS-91 enhances oil viscosity
. . . to reduce friction and wear.
How To Use
Mix TS-91 Super Moly Treatment with the
oil. For mixing in a quart of
oil, replace 2 oz. of oil with 2 oz. of TS-91
. It blends in readily and
thoroughly simply by shaking the container for about 20
seconds. For mixing a gallon of oil,
replace 8 oz. of the oil with a bottle of TS-91
. Shake well.
Container Size: 8 oz net weight
plastic bottle and 1 gal. jug
|
