TS-90 Moly Gear Concentrate
[40-90-203]
55 Gal Drum
Application
TS-90 is an additive designed to impart high performance benefits to finished enclosed gear oils. It is added to gear oils at a mixture ratio of 1:9 (10% treatment); that is 1 part of TS-90 to 9 parts of gear oil. A ratio slightly more or less is acceptable. (TS90, TS 90)
|
Mud Pump |
Benefits
TS-90 is made from a blend of high-quality polymers and moly. When added to finished oil, it coats all surfaces with a tough, slippery film. The polymers help the oil to withstand higher loads than normal. Friction is reduced, allowing moving surfaces to operate smoother and quieter under varying load conditions. Lower friction reduces operating temperatures. TS-90 Moly Gear Concentrate is very resistant to degradation by high shear. The moly also substantially reduces friction and improves the extreme pressure, load carrying and antiwear capabilities of gear oils.
Advantages include:
• Greater energy efficiency
• Reduced gear wear
• Better gear performance through reduced friction
• Protection during intermittent, extreme operating conditions
• Improved gear noise levels
Specifications
Base Fluids |
Polymers |
Solid lubricants |
MoS2 |
Particle size (moly) |
0.3 to 0.6 microns |
Pour point, °F |
45 |
Flash point, °F |
380 |
Viscosity, kenematic, cSt @ 100°F |
574.7 |
Timken test, of oil with TS-90, min |
60 lbs |
Shelf life |
three years |
NOTE: Do not use in crankcases of internal combustion engines.
For SDS, please eMail or call:
Tel: (713) 671-2676
Toll Free: (800) 508-5545
info@tsmoly.com