TS-70 Moly Paste With 70% MoS2
[15-70-1201]
Case of 12-1 lb Jar
Application
TS-70 is a general purpose moly paste with many uses. It has proven to be an outstanding lubricant for a saltwater environment, above and below the surface: subsea riser, BOP, flange equipment and structural bolts. Other applications are components for press fittings, threads in tapping, boundary lubricating of parts in assembly and make-up, bushings of heavily loaded slow moving bearings, and many more. Apply by brushing or burnishing.
Benefits
TS-70, with 70% by weight of molybdenum disulfide, provides uniform and durable boundary lubrication under extreme pressure, in wet or corrosive environments, and over a wide temperature range. Its coefficient of friction nearly approaches that of pure MoS2, and superior wear protection is assured. TS-70 does not contain metals.
Specifications
NLGI Grade |
No. 2 |
Cone Penetration @77°F (ASTM D217) |
(Unworked) |
252 |
(Worked) |
276 |
Solids Oxidation, °F |
Begins at 750 |
Minimum Temperature, °F |
0 |
Flash Point, °F, (CoC) (ASTM D42) |
520 |
Fire Point, °F, (CoC) |
600 |
Humidity Cabinet, 60 days (ASTM D1748) |
Pass (no rust) |
Salt Spray, 60 Days (ASTM B117) |
Pass (no rust) |
Wear Preventive Characteristics (ASTM D2266) |
Scar diameter, mm |
0.50, 0.42 |
Coefficient of friction |
0.044,0.045 |
|
|
|
|
|
Mean K Factor |
|
ASTM A 193 B-7 Bolt |
0.135 |
ASTM A 540 B-23 Bolt |
0.113 |
For SDS, please eMail or call:
Tel: (713) 671-2676
Toll Free: (800) 508-5545
info@tsmoly.com