TS-74 Stainless Antiseize
10 lb Tub
TS-74 Stainless Antiseize is a new thread lubricant designed for stainless, titanium, and other gall-prone threaded connections. It is highly recommended where water washout is a concern, and in sub-sea applications, it is unaffected by marine micro-organisms.
TS-74 Stainless Antiseize eliminates wear and galling. TS-74 adheres to heavily loaded rotating, reciprocating or sliding parts. It may be used on any heavily loaded equipment that would normally be lubricated with an extreme pressure grease. TS-74 is a film forming lubricant having a strong polar attraction to metal. During use, a chemical reaction occurs on areas subjected to heavy loading and frictional heat. This reaction creates a resilient, self-lubricating layer in the metal surface that helps prevent further abrasive contact. NPT and all certain other connections can be tightened until a metal-to-metal seal is achieved, but without galling.
|NLGI Grade||2 ½|
|Temperature Range||0°F to 300°F|
|Viscosity, SUS @100°F||730|
|Water spray off (with 5% salt spray) ASTM D-4049||0%|
|U.S. Environmental Protection Agency static sheen test||Pass|
|K-Factor||(316 Stainless Steel Bolts) 0.174|
*96 Hr acute product test P.premelas. (1000 ppm Survival: 100%; 96 Hr LC50: > 1000 ppm)
For SDS, please eMail or call:
Tel: (713) 671-2676
Toll Free: (800) 508-5545