Application

TS-60 SG is designed to lubricate all types of splined shafts, motorcycle drive splines, u-joints, swing arms, starter drive gear, bushings, pins, etc. Formulated with synthetic base oil and 60% molybdenum disulfide, TS-60 SG withstands extreme heat and protects components under heavy load. Uniform and durable boundary lubrication is provided on parts operating in wet and harsh environments. TS-60 SG is highly adhesive and will not fling off or dry out under accelerated conditions.

For splines and other mechanical components, clean off old lubricant with a solvent and let dry.  Using a lint free cloth, or brush applicator, work TS-60 SG into crevices and leave a thin coating of grease on the surface. 

NLGI Grade No. 2	No.2
Cone Penetration, unworked (ASTM D217)	265-295
Thickener Type	Calcium Sulfonate
Dropping Point, oF (oC)	>500 (>260)
Solids oxidation, oF (oC)	750 (399)
Kinematic Viscosity (ASTM D445)
cSt@40oC	460
cSt@100oC	35.4
Four Ball EP, Weld Point, kg (ASTM D2596)	250
Four Ball Wear, Scar Width, mm	0.85
Water Spray-Off, % Loss (ASTM D4049)	2.6
Water Washout, % Loss (ASTM D1264)	1.35
Oil Separation (ASTM D4425)	1.50
Leakage Tendencies of Automotive Grease, g (ASTM D4290)
20h @ 320oF (160oC)	0.02
Copper Strip Corrosion for Greases (ASTM D4048) modified
212oF (100oC) @ 3hrs	1B