TS-60 SG Spline Grease
[10-60-994]
4 oz Jar
Application
TS-60 SG is designed to lubricate all types of splined shafts, motorcycle drive splines, u-joints, swing arms, starter drive gear, bushings, pins, etc. Formulated with synthetic base oil and 60% molybdenum disulfide, TS-60 SG withstands extreme heat and protects components under heavy load. Uniform and durable boundary lubrication is provided on parts operating in wet and harsh environments. TS-60 SG is highly adhesive and will not fling off or dry out under accelerated conditions.
For splines and other mechanical components, clean off old lubricant with a solvent and let dry. Using a lint free cloth, or brush applicator, work TS-60 SG into crevices and leave a thin coating of grease on the surface.
NLGI Grade No. 2 |
No.2 |
Cone Penetration, unworked (ASTM D217) |
265-295 |
Thickener Type |
Calcium Sulfonate |
Dropping Point, oF (oC) |
>500 (>260) |
Solids oxidation, oF (oC) |
750 (399) |
Kinematic Viscosity (ASTM D445) |
|
cSt@40oC |
460 |
cSt@100oC |
35.4 |
Four Ball EP, Weld Point, kg (ASTM D2596) |
250 |
Four Ball Wear, Scar Width, mm |
0.85 |
Water Spray-Off, % Loss (ASTM D4049) |
2.6 |
Water Washout, % Loss (ASTM D1264) |
1.35 |
Oil Separation (ASTM D4425) |
1.50 |
Leakage Tendencies of Automotive Grease, g (ASTM D4290) |
|
20h @ 320oF (160oC) |
0.02 |
Copper Strip Corrosion for Greases (ASTM D4048) modified |
|
212oF (100oC) @ 3hrs |
1B |
For SDS, please eMail or call:
Tel: (713) 671-2676
Toll Free: (800) 508-5545
info@tsmoly.com