| 800.508.5545

TS-115 Corrosion Control Grease


TS-115 is a multi-purpose, bearing and machinery grease for use where salt water, salt air or atmospheric chemicals are present. Plants such as fertilizer, desalinization, petroleum, chemical, caustic, soda, potash plants, and sewage treatment could all use TS-115. TS-115 also may be used in underwater conditions. USDA "H2" accepted. (TS-115 may be incompatible with some greases. Complete bearing disassembly and cleaning prior to use may be necessary.) May be used as an assembly lube where elastomer compatability is important.


TS-115 has proven effective to protect equipment from rust and corrosion. It has a high melting point, over 500°F, outstanding mechanical stability, and excellent resistance to water washout. It may also be used as a protective coating for exposed metal to prevent rusting.


ThickenerCalcium Complex
NLGI Grade1 1/2
Penetration, unworked (D 217) worked 60 strokes290-310
Base oil properties
  Base oil viscosity, (D445)
    @ 40°C, cSt143.9
    @ 100°C, cSt17.9
  Pour point, oC (oF) (D97)-18 (-0)
  Flash point, oC,(oF) (D92)224 (435)
  Viscosity Index (D 2270)138
Timken OK load, lbs (D 2509)35
Four Ball EP, Weld Point, kg, (D 2596)500
Four Ball EP, LWI, (D 2596)65
Four Ball Wear, mm (D2266)0.40
Corrosion Protection:
  Roller bearing, stored, wet condition, (D1743)Pass
  Salt Spray, 5%, 2000 Hours, (B117)Pass (No Corrosion)
Copper strip corrosion rating (D 4048)1A
Oxidation stability, (D 942) (100 hr, psi loss)<1
Minimum operating temperature-20°F
Dropping point (D 2265), Min 0F (0C)500 (260)
VoC ContentNil

For SDS, please eMail or call:

Tel: (713) 671-2676

Toll Free: (800) 508-5545


SKU : 10-115-101
Categories : Valve Grease